Becker XL120/3G 4A motor for swimming pool roller shutter – 120Nm

Description

Becker DC motor for above-ground pool roller shutters. Silent, robust and efficient, the Becker XL120 motor has a diameter of 58 mm, a force of 120 Newton metres and a rotation speed of 4 revolutions per minute. With a power rating of 120W and 5Ah, the Becker XL120/3G motor comes with a 4-metre cable. This above-ground pool cover motor is IP55 certified and comes with a 2-year guarantee.

The accessories, i.e. the head, screw and end-of-stroke adjustment rod, are supplied with the motor.

Other Becker motor accessories are available separately:

• Becker motor end cap
• Becker motor clip holder

Replacement Becker motor for swimming pool covers of the following brands: ASTRAL, APF, WOOD, Del, Abriblue and Walter (WaluRoll)

The limit switches on the Becker XL120 3G 4A roller shutter motor are mechanical and can be adjusted from the motor head using the limit switch adjustment knobs.

Installation of the Becker XL 120 24 V roller shutter motor is quick and easy, and can be carried out on either the left or right-hand side. When replacing a similar old motor, it is important to keep the brackets already in place in the roller shutter axis.

• Motor for above-ground pool roller shutter
• Wired type
• Mechanical limit switches with thumbwheel adjustment
• Rated voltage: 24 volts direct current
• Rotating torque: 120 nm
• Speed: 4 rpm
• Current: 5Ah
• Power consumption: 120W
• Operating mode: S2 8min
• Cable length : 4m
• Cable type: 4 wires. Rubber – S05RN-F 4×1 white
• Protection class: IP55
• 2-year warranty
• Reference : 2120 096 007 0 (motor compatible with older generation Becker xl120 motors)

Check the dimensions of your current motor:

Note that the latest Becker XL120 engines are a little shorter; they measure 63 cm from the blue ring to the head.

Also available in 60Nm and 200Nm:

• Becker XL60 motor – 60Nm
• Becker XL200 motor – 200Nm

BECKER XL120/3G 4A ENGINE TECHNICAL DATA SHEET : Becker XL120 engine technical data sheet

Wiring correspondence with previous generations of Becker pool curtain motors

The latest Becker XL120 24V pool motors have a power cable with coloured strands instead of the numbered black strands present on the old Becker motors.

Below is the wiring correspondence for your new Becker XL120 motor
Cable n°1 = BLUE (limit switch 1)
Cable n°2 = BROWN (limit switch 2)
Cable n°3 = BLACK (neutral/earth 0V)
Cable n°4 = RED (phase + 24V power supply)

Connection diagram using a fixed / momentary position switch

Functions of the Becker 120Nm motor

Drive torque / speed / current diagram