Becker XL200/3G 4A motor for swimming pool roller shutter – 200Nm

Description

Quiet, robust and efficientBecker motor for swimming pool roller shutters with a diameter of 58 mm, a force of 200 newtons and a rotation speed of 3 revolutions per minute. With a power rating of 163W and 6.8Ah, the Becker XL200 3G motor comes with a 4-metre cable. This above-ground pool cover motor is IP55 certified and comes with a 2-year guarantee.

Accessories, including the head, screw and end-of-stroke adjustment rod, are supplied with the motor.

Other Becker motor accessories are available separately:

• Becker motor end cap
• Becker motor clip holder

Replacement Becker motor for swimming pool covers of the following brands: ASTRAL, APF, WOOD, Del, Abriblue and Walter (WaluRoll)

The limit switches on the Becker XL200 above-ground roller shutter motor are mechanical and can be adjusted from the motor head using knobs.

Installation of the Becker 200Nm 24 V roller shutter motor is quick and easy, and can be carried out from either side. When replacing a similar old motor, it is important to keep the brackets already in place in the roller shutter axis.

• Motor for above-ground pool roller shutter
• Wired type
• Mechanical limit switches with thumbwheel adjustment
• Rated voltage: 24 volts direct current
• Torque: 200 Nm
• Speed: 3 rpm
• Current: 6.8Ah
• Power consumption: 163W
• Operating mode: S2 8min
• Cable length: 4m
• Cable type: 4 wires. Rubber – S05RN-F 4×1 white
• Protection class: IP55
• 2-year warranty
• Reference : 2200 096 001 0

Also available in 60Nm and 120Nm:

• Becker XL60 motor – 60Nm
• Becker XL120 motor – 120Nm

BECKER XL200/3G ENGINE TECHNICAL DATA SHEET 4A : Becker XL200 engine technical data sheet

Wiring correspondence with previous generations of Becker pool curtain motors

The latest Becker XL200 24V pool motors have a power supply cable with coloured strands instead of the numbered black strands present on the old Becker motors.

Below is the wiring correspondence for your new Becker XL200 motor
Cable n°1 = BLUE (limit switch 1)
Cable n°2 = BROWN (limit switch 2)
Cable 3 = BLACK (neutral/earth 0V)
Cable 4 = RED (phase + 24V power supply)

Connection diagram using a fixed / momentary position switch

Functions of the Becker 200Nm motor

Drive torque / speed / current diagram