Complete inlet nozzle with Adjustable Jet, for gluing Ø 50mm DESIGN – Weltico

Description

The Weltico Design return inlet is an essential element for optimizing your pool. Designed by the Weltico brand, this model offers superior performance and great ease of installation.

The return inlet has a diameter of 50 mm for a glue mounting, or 2″ for a screw mounting. For optimal drilling, a Ø74mm hole is required for the panel.

This return inlet is available in three models for several types of use: Concrete, Concrete/Liner-Panel/Liner and Shell. Its universal design allows use in various piping systems.

It ensures a flow rate of approximately 10 m³/h at 0.6 bar, guaranteeing efficient water circulation. The adjustable jet has a diameter of Ø15mm, thus allowing adjustment according to your needs.

Made of ABS, the nozzle is specially designed to resist the aggression of chemicals used in swimming pools. It is UV resistant, making it suitable for outdoor use.

The return inlets are always opposite the filtration skimmers. Preferably oriented towards the surface. Depending on your pool and its width, it may be useful to add more inlets. The inlets are installed 75 to 100 cm from the corner of the pool. If using a 3rd inlet, it should be centered on the pool. Regarding the return depth, it should be between 25 and 40 cm below the pool coping.