Becker XL200/3G 4A motor for swimming pool roller shutter – 200Nm

Becker XL 200 3 G motor with 200nm power and IP55 for pool cover

Motor Becker for pool roller shutter silent, robust and efficient with a diameter of 58 mm, a force of 200 newtons and a rotation speed of 3 revolutions per minute. With a power of 163W and 6.8Ah the motor Becker XL200 3G is equipped with a 4-meter cable. This motor for above-ground pool covers is IP55 certified and is covered by a 2-year warranty.

Accessories, namely the head, screw and fine limit switch adjustment rod, are supplied with the motor.

Other accessories for Becker motors are available separately:

• Becker motor end cap
• Clip support for Becker motor

Becker replacement motor for pool covers from brands: ASTRAL, APF, WOOD, Del, Abriblue and Walter (WaluRoll)

The limit switches of the roller shutter motor above-ground Becker XL200 are mechanical and adjustment is done from the motor head using knobs.

The installation of the Becker 200Nm 24 V roller shutter motor is simple and quick, it can be done on the right or left side. When replacing an old similar motor it is important to keep the supports already in place in the roller shutter axis.

To learn more about choosing your pool Becker, here is our complete article: Becker pool motor buying guide | Comparison & sizing advice

Technical details of the Becker XL200 3G pool motor with 200nm torque

• Motor for above-ground pool roller shutter
• Wired type
• Mechanical limit switches with knob adjustment
• Nominal voltage: 24 volts direct current
• Rotation torque: 200 Nm
• Speed: 3 revolutions/minute
• Current: 6.8Ah
• Power consumption: 163W
• Operating mode: S2 8min
• Cable length: 4m
• Cable type: 4 wires. Rubber – S05RN-F 4×1 white
• Protection class: IP55
• 2-year warranty
• Reference: 2200 096 001 0

Becker motor also available in Becker XL120 120Nm and Becker XL60 60Nm :

• Becker XL60 Motor – 60Nm
• Becker XL120 Motor – 120Nm

Comparison table of Becker motors for pool covers

TECHNICAL DATASHEET FOR BECKER XL200/3G 4A MOTOR: Becker XL200 motor technical datasheet

Wiring correspondence with older generations of Becker pool cover motors

The latest Becker XL200 24V pool motors have a power cable with colored strands instead of the numbered black strands found on older Becker motors.

Below is the correspondence for wiring your new Becker XL200 motor
Cable #1 =  BLUE (limit switch 1)
Cable #2 = BROWN (limit switch 2)
Cable #3 = BLACK (neutral/ground 0V)
Cable #4 =  RED (phase + 24V power supply)

Connection diagram for Becker XL 200 motor via a fixed/momentary position switch

Becker 200Nm XL200 Motor Functions

XL200 Motor Functions
	Mechanical limit switch	Will prevent the motor from performing excessive movements, thus preserving its lifespan
	Limit switch adjustment	Point-to-point adjustment
	Installation	Designed for right or left mounting
	Power supply	24 V direct current
	High axial load	The motor can withstand a maximum static load of 150 kg
	Water jet protection	High protection against water ingress
	Operating time	8 minutes
	Integrated rest current brakes	Holds the motor in position when powered off
	4-wire connection cable

The Becker XL200 above-ground roller shutter motor is IP55 certified

Why is IP55 important?

A pool motor operates in a humid environment, exposed to water splashes, dust and outdoor variations.

The IP55 rating guarantees:

• protection against dust ingress

• resistance to water jets from all directions

• better electrical safety

• greater motor durability

In summary, IP55 is essential to ensure the reliability, safety and longevity of a pool motor.

Becker XL200: Torque / Speed / Current Diagram

What to do if?