SIREM COVEO C-80 80Nm motor for above-ground pool cover 24V

Original price was: 690,00 €.Current price is: 635,00 €.

Motor for above-ground shutters with 2-year guarantee
Mechanical limit switch adjustment for greater reliability
Suitable for shutters up to 10 x 4 m

In stock (can be backordered)

Add to wishlist

Add to quote

SKU: sirem-coveo-c80 Categories: Motors, Motors, control boxes, and commands, Outdoor motors, SIREM

Description
Additional information

Description

Details of the SIREM COVEO C-80 motor sold bare

The C-80 motor has mechanical limit switches. It is made in France by Sirem, the specialist in pool cover motorisation. The motor delivers 80 Newton metres at 6 rpm. This motor is IPX5 waterproof. It can be fitted to all automatic above-ground cover projects up to 10 metres by 4 metres.

Sirem COVEO C80 24Vdc motor delivering 80 Nm and 6rpm for above-ground pool safety covers.

Suitable for pools up to 10 x 4 m
24 Vdc motor
Motor 80 Nm = 6.0 rpm
Multicore flexible cable
IPX5 watertightness class
Mechanical limit switch management

Warning: the motor is sold bare to replace an existing C-80 motor. The 2 bearings for adapting to the winding shaft and the fixing shaft on the cable side must be taken from the old motor.

Mechanical limit switch adjustment for greater reliability

The limit switches are mechanical for greater reliability, making the motor inherently insensitive to electromagnetic disturbances (storms, in particular).

Complies with the following standards

According to NF P90-308, the C80 operator complies with the provisions of the following European directives:

Machinery Directive 2006/42/EC
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU

To ensure maximum lightning resistance, these products are qualified in accordance with standards EN 61000-4-4 (level 4) and EN 61000-4-5 (level 4).

Technical characteristics of the SIREM COVEO C-80 motor

Reduction ratio	1/344
Power supply voltage	24 Vdc
Power consumption at max torque	6 A
Max torque	80 N.M
Speed at max torque	6.0 rpm
Output shaft	By anti-lift loop – Autofix optional
Materials	Phosphated steel
Tube	Painted steel
Screws and bolts	Zinc-plated steel
Size	9.4/0.2mm
Composition	4 * 1.5 mm
Tightness (NFC15-100)	IP X
Maximum permissible load	2750 N