AN1232 24V 5A box for underwater roller shutters

Compatible with all immersed motors (max 5A) with electronic or mechanical sensors (UNICUM, SIREM, CAME…) for roller shutters of the following brands: APF, CAMAROL, DEL, BWT, Everblue, Abrisud, Sofatec, Aqualiss…

For motors with mechanical or electronic limit switches

• Slow mechanical sensor (min 0.8 Hz)
• Slow or fast electronic sensor (100 Hz max)
• 2 fast electronic sensors (100 Hz max)

Overload protection current measurement

Motor current measurement is used to control motor operation:
– Reference current to detect anomalies
– overcurrent (damage to the motor or control box)
– Excessive force on the shutter (movement blocked, anti-ripping)

Continuous or pulse O/F control

In countries where it is authorised, the impulse command allows the shutter to be operated without prolonged action on the Open/Close contactor. The control units in this range allow you to select the type of control. Please note: pulse control on closing is prohibited in France.

Soft start on closing

The box manages the gradual start-up of the closing shutter to ensure it runs smoothly. This soft start can be configured.

Reinforced lightning protection

Because swimming pools are usually located outside buildings, lightning can have a particularly strong impact on them and the electrical equipment connected to them. Our enclosures have reinforced lightning protection.

Detailed instructions

To help you install and use our enclosures as simply and effectively as possible, detailed instructions are available online. A QR code on the label on the outside of the enclosure gives you easy access.

Guarantee

Our products are guaranteed for two years from the date of purchase. If a fault occurs during normal use, we will repair or replace the product after an expert assessment in our workshops.

Manufacture

Our products are designed and manufactured in France. In particular, the important stages of assembling the electronic components, checking the cards and assembling the box are carried out in our workshops.

European standard

European regulations require a high level of safety and quality to guarantee users the lowest possible level of risk. Our products are designed and manufactured to meet these requirements, and carry the CE mark.

Compliance

Safety equipment for access to swimming pools, and shutters in particular, are governed by standard NF P 90-308.