RAYTECH MAGIC FLUID 170 ml – Two-component polymer gel, Magic Fluid®, Silicone, Pack, Blue, 170 ml

Raytech’s Magic Fluid® is a two-component gel with high dielectric and thermal properties, ideal for connection systems (junction boxes or casings) for power cables.

The insulating gel can be poured into junction boxes to insulate your electrical connections near the pool. Magic Fluid gel guarantees IP68 protection and can replace any type of resin. It’s a self-sealing polymer-type insulator in a practical single-use sachet, with cold cross-linking in 15 minutes. Once applied, this low-viscosity insulator covers the electrical connection (domino, Wago…) by cross-linking in less than 15 minutes. It cures at a very low temperature, avoiding thermal stress on the materials with which it comes into contact.

ADVANTAGES

• Non-toxic and safe, and not classified as hazardous under the CLP Directive.
• For all applications involving high voltages and temperatures!
• Fast curing (only 10 minutes).
• Re-accessible even after long periods of use.
• Low viscosity.
• No expiry date.
• Cross-linking time: fast (approx. 10 to 15 minutes at 23°C).
• Volume resistivity: 2.10¹5 Rcm
• Overload temperature for short periods: up to 250°C
• UV and mould resistant
• Non-toxic: does not require hazard labelling
• Suitable for installation in salt water (the sea) and chlorinated water (swimming pools)

Gel: UL 94-HB
Dielectric strength: >20 kV/mm
Curing time: fast (approx. 10 min. at 23°C)
Volume resistivity : >2 .¹⁰¹⁵ Ω cm
Operating temperature: -60°C / +200°C
Overload temperature for limited times: up to 250°C
Stabilised against: mould – UV
Degree of protection: IP68 (in appropriate cases)