image 7

Step 1:

Remove the old motor

Disassemble the 2 bearings

Image15

Step 2:

Reassemble the bearings on the new motor

 Insert the new motor inside the tube

Image16

Step 3:

Ensure that the motor is perfectly inserted into the tube

IMG_1960
IMG_1961
Image17

Step 4:

Drill a hole using a 5 mm drill bit

Image4
Image5

Step 5:

Countersink the hole with a 16.5 mm countersink bit

Image6
image

Step 6:

Reuse the old hardware

image 4

Step 7:

Perform the same step on the other side

Available Becker motors