Becker XL120 3G 24V 120Nm Motor for pool roller shutter

Motor Becker XL 120 3G for above-ground pool roller shutter from brands Del, Abriblue or Walu roll from WALTER…

Quiet, robust and efficient, the motor Becker XL120 has a diameter of 58 mm, a force of 120 newton meters and a rotation speed of 4 revolutions per minute (4A). With a power of 120W and 5Ah, the motor Becker XL120/3G is equipped with a 4-meter cable. This motor for above-ground pool roller shutters is IP55 certified and is covered by a 2-year warranty.

Warning: Do not confuse this XL120/3G motor with the XL120 or XL120/3 references which are not waterproof and are not suitable for motorizing pool shutters.

Becker XL120 3G motor with 120Nm torque for pool covers

Corresponds to the old Becker references R120/3 or R120/3G with or without the inscription BECKER TENDED FEATURES as well as reference KA960310400. Our Becker XL 120 3 G motor at 4 revolutions per minute also replaces the version

Becker XL 120 pool motor supplied with fixing screw and end limit adjustment rod

Other accessories for Becker motors are available separately:

• Becker motor end caps for all brands of roller shutters
• Clip support for Becker motor present on the roller shutter pole
• 24V stabilized power supply for BECKER pool motor

Becker XL 120nm replacement motor for pool shutters from brands: ASTRAL, APF, WOOD, Del, Abriblue and Walter (WaluRoll)

The end limits of the roller shutter motor Becker XL120 3G are mechanical and the adjustment is made from the motor head using end limit adjustment wheels.

The installation of the Becker XL 120 24 V roller shutter motor is simple and quick, it can be done on the right or left side. When replacing an old similar motor, it is important to keep the bearings already in place in the roller shutter axis as well as the metal insert at the end limit head. This element can be unclipped and installed on the new motor. If you wish to replace this insert, you will find all models on this page: Inserts for Becker motors and all Becker motor supports present on the shutter post: Metal supports for Becker motors

To learn more about choosing your pool Becker motor, here is our complete article: Becker pool motor buying guide | Comparison & sizing advice

Technical details of the Becker XL 120 24V pool motor with 120 Nm torque

• Motor for above-ground pool roller shutter
• Wired type
• Mechanical limit switches with adjustment wheels
• Nominal voltage: 24 volts direct current
• Torque: 120 nm
• Speed: 4 revolutions/minute
• Current: 5Ah
• Power consumption: 120W
• Operating mode: S2 8min
• Cable length: 4m
• Cable type: 4 wires. Rubber – S05RN-F 4×1 white
• Protection class: IP55
• 2-year warranty
• Reference: 2120 096 007 0 (motor compatible with previous generations of Becker xl120 and KA960310400 motors)

Check the dimensions of your current motor which must match the Becker XL120 24V motor

Note that the latest Becker XL120 motors are slightly shorter; they measure 63 cm from the blue ring to the head.

The Becker XL120 motor with 120Nm is also available in 60Nm and 200Nm

• Becker XL60 Motor – 60Nm
• Becker XL200 Motor – 200Nm

Comparison table of Becker motors for pool covers

TECHNICAL SPECIFICATIONS OF THE BECKER XL120/3G 4A MOTOR:Becker XL120 motor technical specifications

In your package you will find two installation manuals: the original Becker manual and a supplementary manual written by our team to help you wire the motor. We recommend monitoring the supply voltage, which is generally 28V and stabilizes at 24V under load, i.e. when the cover is activated with the roller shutter.

Wiring correspondence with older generations of Becker XL pool cover motors

The latest Becker XL120 24V pool motors have a power cable with colored wires instead of the numbered black wires found on older Becker motors.

Below is the correspondence for wiring your new Becker XL120 motor
Cable #1 =  BLUE (limit switch 1)
Cable #2 = BROWN (limit switch 2)
Cable #3 = BLACK (neutral/ground 0V)
Cable #4 =  RED (phase + 24V power supply)

Becker XL120: connection diagram via a fixed/momentary position switch

Becker 120Nm motor functions

XL120 motor functions
	Mechanical limit switch	Will prevent the motor from making excessive movements, thus preserving its lifespan
	Limit switch adjustment	Point-to-point adjustment
	Installation	Designed for right or left installation
	Power supply	24 V direct current
	High axial load	The motor can be subjected to a maximum static load of 150 kg
	Water jet protection	High protection against water ingress
	Operating time	8 minutes
	Integrated static current brakes	Holds the motor in position when powered off
	4-wire connection cable

The Becker XL120 motor for above-ground roller shutters is IP55 certified

Why is IP55 important?

A pool motor operates in a damp environment, exposed to water splashes, dust, and outdoor variations.

The IP55 rating guarantees:

• protection against dust infiltration

• resistance to water jets from all directions

• better electrical safety

• greater motor durability

In summary, IP55 is essential to ensure the reliability, safety, and longevity of a pool motor.

Drive torque / speed / current diagram of the Becker XL120 24V motor

What to do if?