Becker XL200 3G 24V 200nm motor for above-ground pool safety cover

Becker XL 200 3 G motor with 200Nm power and IP55 rating for pool covers

The pool motor Becker XL200 / 3G 24V is the most powerful high-end solution for automating XXL pool covers. Thanks to its exceptional 200 Nm torque, this 24V tubular motor allows for effortless operation of wide pool covers or those made of polycarbonate slats. This robust and efficient Becker motor for swimming pool shutters has a diameter of 58 mm, a force of 200 newtons, and a rotation speed of 3 revolutions per minute. With a power of 163W and 6.8Ah, the Becker XL 200 3G is equipped with a 4-meter cable. This motor for above-ground pool covers is IP55 certified and is covered by a 2-year warranty.

Accessories, namely the head, the screw, and the limit switch adjustment rod, are supplied with the motor.Other accessories for Becker motors are available separately:

• Becker motor end cap
• Clip support for Becker motor

Replacement Becker motor for pool covers from brands: ASTRAL, APF, WOOD, Del, Abriblue and Walter (WaluRoll)

The limit switches of the pool cover motor above-ground Becker XL200 are mechanical and adjustment is performed from the motor head using adjustment wheels. The assembly of the Becker 200Nm 24V pool cover motor is simple and fast, and it can be installed on either the right or left side. When replacing an old, similar motor, it is important to keep the supports already in place on the pool cover axis. To learn more about choosing your Becker pool motor, here is our complete article: Becker pool motor buying guide | Comparison & sizing advice

Technical details

• Motor for above-ground swimming pool cover
• Type: wired
• Mechanical limit switches with adjustment via wheels
• Rated voltage: 24 volts direct current
• Rotation torque: 200 Nm
• Speed: 3 revolutions/minute
• Amperage: 6.8Ah
• Power consumption: 163W
• Operating mode: S2 8min
• Cable length: 4m
• Cable type: 4 wires. Rubber – S05RN-F 4×1 white
• Protection class: IP55
• 2-year warranty
• Reference: 2200 096 001 0

Becker motors also available in XL version120, XL60 and XL35

• Becker XL35 motor – 35Nm
• Becker XL60 motor – 60Nm
• Becker XL120 motor – 120Nm

Comparative table of pool motors

TECHNICAL SHEET FOR THE XL 2003G 4A MOTOR: Becker XL200 motor technical sheet

Wiring correspondence with older generations of motors

The latest Becker XL200 24V pool motors have a power cable with colored strands instead of the numbered black strands found on older Becker motors.Below is the correspondence for the wiring of your new Becker XL200 motor
Cable no. 1 =  BLUE (limit switch 1)
Cable no. 2 = BROWN (limit switch 2)
Cable no. 3 =BLACK (neutral/ground 0V)Cable no. 4 =  RED (phase + 24V power supply)

Connection diagram via a fixed/momentary position switch

Functions

XL200 Motor
	Mechanical limit switch	Prevents the motor from performing excessive movements, thus preserving its service life
	Limit switch adjustment	Point-to-point adjustment
	Installation	Designed for right or left-hand mounting
	Power supply	24 V DC
	High axial load	The motor can be subjected to a maximum static load of 150 kg
	Protection against water jets	High protection against water ingress
	Operating time	8 minutes
	Integrated quiescent current brakes	Maintains the motor in position when it is powered off
	4-wire connection cable

The IP55 certified motor for above-ground pool covers

Why is IP55 important?

A pool motor operates in a humid environment, exposed to water splashes, dust, and external variations.

The IP55 rating guarantees:

• protection against dust ingress

• resistance to water jets from all directions

• improved electrical safety

• greater motor durability

In short, IP55 is essential to ensure reliability, safety, and longevity of a pool motor.

Torque / speed / current diagram

What to do if?

Manuals:

• Assembly
• Disassembly